Machine features
- IGBT inverter full-bridge soft-switch inverter technology, higher efficiency, more energy saving
- Auto switch off from phase lack, over current, over heat, and over/under-voltage
- Welding current, voltage and marching speed can be preset accurately
- Strong ability to suppress network voltage fluctuations, with a width of up to ± 20%, duty cycle of power source is as high as 100%
- Wire feeding auto checking, wire sending stop automatically while the wire is well contact to work-pieces, and wire feeding will speed up automatically while pressing the wire back button. Wire will be sent back automatically while welding finish
- AC frequency and duty cycle both adjustable
- Two wires will not influence each other and will not interfere each other
Technical features
- In AC SAW welding, the heat input is lower than that of DC SAW welding, suitable for welding metals such as high-strength steel, ultra-high strength steel, and nickel steel
- AC SAW welding is suitable for splicing welding, welding with small deformation, welding with few heat affected zones
- Can realize three-wire or four-wire welding together with DC SAW welding machine and realize quick and high efficiency welding
Technical Parameters
Model Name |
MZE-2500 |
Input power |
3-pahse 380V or 415V 50Hz |
Rated input power |
147KVA |
Rated input current |
223A |
Welding current |
2500A 100% |
No-load voltage |
90V |
Welding current |
200-2500A |
Diameter of wire |
Φ3-6mm*2 |
AC frequency |
5~60Hz |
Duty cycle |
0~100% |
Air switch |
250A |
Input cable |
4×25mm2 |
Insulation grade |
F |
Lift means |
Lift |
Protection grade |
IP21S |